- Glock Concealed Carry Belt Clips
- Inside the Waistband Concealed Carry
- Eliminates Bulk from Traditional Style Holsters
- No Printing – Slimmest Possible Carry Profile
- 2 Minute Install – No Modifications
- Glock Trigger Safety Products Available
- American Made
- Trusted by Law Enforcement, Military and Licensed Citizens since 1995!
- The Best Glock ‘Holster’ for Concealment
BUNDLE (CLIP + TRIGGER SHEATH) – GLOCK 20, 21, 21SF, 29, 30, 30SF, 37, 38, 39, 40, 41
Clipdraw Belt Clip & Trigger Guard Combo
G43 Fits Glock 43 .9MM
G42 Fits Glock 42 .380
GS Fits Glock 17-19-22-23-24-25-26-27-28-30S-31-32-33-34-35-36
GL Fits Glock 20-21-21SF-29-30-30SF-37-38-39-40-41
- Stop dressing ‘around’ your holster – wear the clothes you want while comfortably and securely carrying your concealed Glock.
- Clips to your waistband (with or without belt), boot, pocket, vest and more – with confidence.
- Clipdraw is always ready – grab and go for a quick trip out or wear confidently as part of your everyday carry.
- Great for warm weather – wear with your shorts and t-shirt.
- Not an either/or – Clipdraw will fit with your traditional style holster. You will not need to remove your Clipdraw when carrying with other holsters.
- Compatible with front mounted or grip lasers
- Clips are made specific to each Glock and are NOT interchangeable!
- GS-B fits 9MM, .357, .40 & Slim .45 Glocks (17-19-22-23-24-25-26-27-28-30S-31-32-33-34-35-36)
- GL-B fits 10MM & .45 (20-21-21SF-29-30-30SF-37-38-39-40)
- GS & GL Clips are Longer
G42-B fits Glock 42 .380 Only
G43-B fits Glock 43 9MM Only
G42 & G43 Clips are Shorter
- Special Tempered Spring Steel Clip with High Quality Powder Coat Finish
- Provides Flex and Memory for use over any sized belt then returns to original retention point. Finish prevents any scratching or abrasions on your Glock.
- Replacement Slide Cover Plate made from Machine Aluminum with 2 Pre-Drilled Screw Holes.
- Adjustable Depth Block.
- 4 Screws, 4 Washers (2 are required, 2 are extra) and Allen Wrench for installation of clip to replacement slide cover plate.
- Each Clipdraw is made to the exact specs of your Glock and can not be interchanged.
- GS & GL Clips are Longer for Standard Frame & Large Frame Glock Pistols
- G42 & G43 Clips are Shorter for ‘Pocket Glocks’ Glock 42 & Glock 43 ONLY
- Add a custom engraving to your Glock Clipdraw!
- Perfect gift for family, friends or yourself
- Names, Nicknames, Dates, 2nd Amendment, Military and Law Enforcement Messages – Anything that’s important to you!
- Quick Shipping – Engraving does not slow down your shipment timeframe
- Separate slide from the frame
- Remove the barrel assembly
- Using a pin punch or screwdriver – press down on black spacer located in the slide of your gun and press towards the muzzle.
- With your other hand – carefully remove the slide cover plate. Be Careful!
- Components are spring loaded.
- Install Clipdraw replacement slide cover plate by pressing on black plastic insert at back end of slide while simultaneously inserting slide cover plate into position.
- Mount the clip on either side using screws, washers and allen wrench provided.
- Kydex Trigger Guard made specifically to fit your Glock.
- Provides trigger protection when your pistol is ‘holstered’
- Guard removes itself when pistol is drawn – no extra steps for the shooter!
- Does NOT fit with front mounted lasers.
- High Quality Kydex does not crack or break
- Set the cord length to your appropriate draw.
GMH fits All Glock Models Except G42 & G43
G4243MH fits Glock 42 & Glock 43 Only
- Snap trigger guard onto pistol over your entire trigger housing area
- Loop cord around your belt or belt loop
- Once drawn from concealed position, the cord will come to full length and kydex guard will remove itself from your pistol.
- Pistol is ready for operation.
- Provides Trigger Protection when your Glock is ‘holstered’
- Ejects easily with trigger finger – adds zero time to your draw
- Right Hand Saf-T-Blok for Right Handed Shooters
- Left Hand Saf-T-Blok for Left Handed Shooters
- Plastic insert with tension key snaps into place securely and firmly
- Rugged Carbon filled Polymer textured to match the Glock
- Use the tension key and included allen wrench to set the Saf-T-Blok to proper tension for your Glock and personal preference.
- Insert Saf-T-Blok behind the trigger in the trigger guard area.
- Once drawn – eject Saf-T-Blok using your trigger finger.
- Glock is ready for Operation.
If you are looking for the best concealed carry holsters for Glocks, you’ll want to try the Clipdraw. Trusted by many satisfied customers.
Looking for some of our other pistol products? We also offer Clipdraw models for Ruger LCP, Springfield XDS, M&P Shield, j-frame revolvers and more!
Feel free to check out our other pistol options and if you have any questions please feel free to reach out to use using the contact form on the site! We have installation guides for all products to help you install the product.