BELT CLIP – XDS & XDS MOD 2 – 9/40/45

(14 customer reviews)
Currently in stock


Product Features

  • -Fits Springfield XDS & XDS MOD 2 Only
  • -Fits 9MM, .40 & .45 Caliber
  • -Does Not Fit XD, XDM or XD Subcompact
  • -Replaces Bulky & Uncomfortable Holsters
  • -Most Discreet Concealment Method
  • -Ambidextrous – Mounts on Right or Left Side
  • -Easy Installation – All Parts Included
  • -Comfortable, Slim & Secure
  • -Made in America
  • -Lifetime Warranty & Money Back Guarantee
  • -Trusted by Law Enforcement, Military & Citizens since 1995

Product Description:

- Clipdraw for Springfield XD Pistols 9MM .40 & .45 Caliber

- Inside the Waistband Concealed Carry

- Eliminates Bulk from Traditional Style Holsters

- No Printing – Slimmest Possible Carry Profile

- 2 Minute Install – No Modifications

- The Best XDS/XD/XDM/MOD2 'Holster' for Concealment




Stop dressing ‘around’ your holster – wear the clothes you want while comfortably and securely carrying your concealed Springfield XD Pistol.

Clips to your waistband (with or without belt), boot, pocket, vest and more – with confidence.

Clipdraw is always ready – grab and go for a quick trip out or wear confidently as part of your everyday carry.

Great for warm weather – wear with your shorts and t-shirt.

Not an either/or – Clipdraw will fit with your traditional style holster.  You will not need to remove your Clipdraw when carrying with other holsters.




- Compatible with front mounted or grip lasers

- XDS-B fits XDS ONLY.  Ambidextrous. 9MM, .40 Caliber & .45 Caliber.  Must be XDS Model!

- XD Right Side fits XD Full or Subcompact, XDM & XD Mod 2.  Right Side Mount Only.  9MM, .40 Caliber & .45 Caliber.

- XD Left Side fits XD Full or Subcompact, XDM & XD Mod 2.  Left Side Mount Only.  9MM, .40 Caliber & .45 Caliber.


Special Tempered Spring Steel Clip with High Quality Powder Coat Finish

Provides Flex and Memory for use over any sized belt then returns to original retention point.  Finish prevents any scratching or abrasions to your pistol.

Replacement Slide Cover Plate made from Machine Aluminum with 2 Pre-Drilled Screw Holes

4 Screws, 4 Washers (only 2 are required, 2 are extra) and Allen Wrench for installation of clip to the replacement slide cover plate.

Each Clipdraw is made to the exact specs of your pistol!


Add a custom engraving to your Springfield XD Pistol Clipdraw!

Perfect gift for family, friends or yourself

Names, Nicknames, Dates, 2nd Amendment, Military and Law Enforcement Messages – Anything that’s important to you!

Quick Shipping – Engraving does not slow down your shipment timeframe


Separate slide from the frame

Remove the barrel assembly

XDS: Using a pin punch or screwdriver – press down on black spacer located in the slide of your gun and press towards the muzzle.

XD/XDM/MOD2: Using a pin punch the same size of your firing pin - press inward on spring loaded firing pin.

Then, with your other hand – carefully remove the slide cover plate.  Be Careful! Components are spring loaded.

Install Clipdraw replacement slide cover plate by pressing on white plastic insert at back end of slide (XDS) or pressing inward on spring loaded firing pin (XD/XDM/MOD2) while simultaneously inserting slide cover plate into position.

Mount the clip on either side using screws, washers and allen wrench provided.


Trigger Guard:


Kydex Trigger Guard made specifically to fit your Springfield XD Pistol.

Provides trigger protection when your pistol is ‘holstered’

Guard removes itself when pistol is drawn – no extra steps for the shooter!

Does NOT fit with front mounted lasers.

High Quality Kydex does not crack or break

Set the cord length to your appropriate draw.


XDSMH fits XDS only 9MM, .40 Caliber & .45 Caliber

XDMH fits XD Full & Subcompact, XDM & XD MOD 2.  9MM, .40 Caliber & .45 Caliber


For Use:

Snap trigger guard onto pistol over your entire trigger housing area

Loop cord around your belt or belt loop

Once drawn from concealed position, the cord will come to full length and kydex guard will remove itself from your pistol.

Pistol is ready for operation.


14 reviews for BELT CLIP – XDS & XDS MOD 2 – 9/40/45

  1. Scott Rager (verified owner)

    I have been carrying my xds 45 all day every day with my clip draw it works fantastic holds the gun close to my body and securely it’s so low profile I now carry my gun with the full size 7 round magazine instead of the 5 round one it hides so well under all but the tightest fitting clothes tip wear a under shirt to make it all day comfortable

  2. Travis (verified owner)

    I really like clip draw it holds my xds 45. I would recommend this product to my friends.

  3. a1j7g (verified owner)

    This is my second ClipDraw purchase. Went from an IWB Kydex holster to the ClipDraw. ClipDraw makes carrying a pistol more comfortable. Quality and fitment is precise. ClipDraw reduces bulky holsters and makes for retrieving your firearm very easy.

  4. Chris Kelly (verified owner)

    No complaints here! Much easier and lower profile than a holster in my opinion. Good quality and hardware. Don’t anticipate any issues. Well worth the reasonable cost.

  5. Tom (verified owner)

    Works perfectly

  6. Ridge (verified owner)

    I’ve been using the clip draw for about 10yrs but the universal clip. I upgraded to the XDS specific clip. Much better. Don’t get me wrong there is nothing wrong with the universal this is just better as it’s a little wider. I’m pleased.

  7. Stephen Garner (verified owner)

    Great product have already told a few friends and they plan on purchasing themselves. I can never find the right holster now I don’t have to worry about that anymore I can carry all the time and be comfortable

  8. Steve (verified owner)

    Works better then the hundreds of dollars I’ve spent on holsters that never seem to fit.

  9. John Legere (verified owner)

    I’ve been looking for a holster that carries my 3.3” xds 40 close to my body. This clip is amazing and let’s you truly conceal carry in just about any clothing. I don’t leave home without it.

  10. Roger Phebus (verified owner)

    The design of the clip keeps the pistol concealed deep in the waistband & is very comfortable & unnoticeable to carry all day everyday. I farm and am in & out of equipment all the time in different positions & it makes my Springfield comfortable to have at all times.

  11. Barry (verified owner)

    I finally found something that works for EDC no matter what I’m wearing! Only down side to on a XDS is the grips on the slide tend to drag when drawing. Not a clip Draw problem tho! Good Job!

  12. Mike Webb (sarge) (verified owner)

    Works perfectly as always with previous orders

  13. Carlos Rodney (verified owner)

    I Love it! Quick easy instructions and to install works great and doesn’t hurt when sitting or moving around. I’m a big guy so that’s very important since I appendix carry. My cousin showed me this product since he recently purchased it too. Now we both have it and use it every day. Had an issue with shipping and my address but there customer service quickly fixed that and I was well satisfied. You won’t be disappointed in this prouduct.

  14. D. Harvey (verified owner)

    Great product, easy assemble & low profile. I have the ClipDraw for my XDS .45. The install was easy enough, just remember to hold in the rear spring when removing the back plate. Will definitely continue to carry.

Add a review

SignUp for the Clipdraw Newsletter

© 2021 Clipdraw. All Rights Reserved.