(19 customer reviews)

ADJUSTABLE BELT CLIP - SPRINGFIELD XDS & XDS MOD 2

  • *NEW* Adjustable Depth of Carry Clip
  • Deep Concealment or Maximum Access
  • Adjust Angle for Perfect Grip when Drawing
  • Fits XDS &  XDS Mod 2
  • Fits 9MM, .40 & .45 Caliber
  • Does Not Fit XD, XDM or XD Subcompact
  • Replaces Bulky & Uncomfortable Holsters
  • Most Discreet Concealment Method
  • Ambidextrous – Mounts on Right or Left Side
  • Easy Installation – All Parts Included
  • Comfortable, Slim & Secure
  • Made in America
  • Lifetime Warranty & Money Back Guarantee
  • Trusted by Law Enforcement, Military & Citizens since 1995

$29.95

  • NEW ADJUSTABLE DESIGN! PATENT PENDING
  • Adjust the depth and angle of your carry
  • You Choose: Attach the block for higher carry and increased access or without the block for maximum concealment
  • Left Side Cant, Right Side Cant or Vertical Carry
  • Completely Customizable to Your Needs
  • XDS Concealed Carry Belt Clips
  • Inside the Waistband Concealed Carry
  • Eliminates Bulk from Traditional Style Holsters
  • No Printing – Slimmest Possible Carry Profile
  • 2 Minute Install – No Modifications
  • Trigger Safety Products Available
  • American Made
  • Trusted by Law Enforcement, Military and Licensed Citizens since 1995!
  • The Best Springfield ‘Holster’ for Concealment

  • Stop dressing ‘around’ your holster – wear the clothes you want while comfortably and securely carrying your concealed XDS.
  • Clips to your waistband (with or without belt), boot, pocket, vest and more – with confidence.
  • Clipdraw is always ready – grab and go for a quick trip out or wear confidently as part of your everyday carry.
  • Great for warm weather – wear with your shorts and t-shirt.
  • Not an either/or – Clipdraw will fit with your traditional style holster. You will not need to remove your Clipdraw when carrying with other holsters.

  • Compatible with front mounted or grip lasers
  • Clips are made specific to each gun and are NOT interchangeable!
  • XDS-A Fits Springfield XDS & XDS Mod 2 only. Fits 9/40/45 Calibers

  • Special Tempered Spring Steel Clip with High Quality Powder Coat Finish
  • Provides Flex and Memory for use over any sized belt then returns to original retention point. Finish prevents any scratching or abrasions on your XDS.
  • Replacement Slide Cover Plate made from Machine Aluminum with 2 Pre-Drilled Screw Holes.
  • Adjustable Depth Block.
  • 4 Screws, 4 Washers (2 are required, 2 are extra) and Allen Wrench for installation of clip to replacement slide cover plate.
  • Each Clipdraw is made to the exact specs of your XDS and can not be interchanged

  • Add a custom engraving to your XDS Clipdraw!
  • Perfect gift for family, friends or yourself
  • Names, Nicknames, Dates, 2nd Amendment, Military and Law Enforcement Messages – Anything that’s important to you!
  • Quick Shipping – Engraving does not slow down your shipment timeframe

  • Separate slide from the frame
  • Remove the barrel assembly
  • Using a pin punch or screwdriver – press down on black spacer located in the slide of your gun and press towards the muzzle.
  • With your other hand – carefully remove the slide cover plate. Be Careful! Components are spring loaded.
  • Install Clipdraw replacement slide cover plate by pressing on black plastic insert at back end of slide while simultaneously inserting slide cover plate into position.
  • Mount the clip on either side using screws, washers and allen wrench provided.

  • Kydex Trigger Guard made specifically to fit your XDS.
  • Provides trigger protection when your pistol is ‘holstered’
  • Guard removes itself when pistol is drawn – no extra steps for the shooter!
  • Does NOT fit with front mounted lasers.
  • High Quality Kydex does not crack or break
  • Set the cord length to your appropriate draw.

XDSTS fits Springfield XDS & XDS Mod 2 9/40/45 Only

  • Snap trigger guard onto pistol over your entire trigger housing area
  • Loop cord around your belt or belt loop
  • Once drawn from concealed position, the cord will come to full length and kydex guard will remove itself from your pistol.
  • Pistol is ready for operation.

If you are looking for the best concealed carry holsters for Springfield XDS, you’ll want to try the Clipdraw. Trusted by many satisfied customers.

Feel free to check out our other pistol options and if you have any questions please feel free to reach out to use using the contact form on the site! We have installation guides for all products to help you install the product.

Related Products

(19 customer reviews)
Subscribe
Notify of
guest
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
JUAN GOMEZ

I purchased the ClipDraw along with the trigger cover for better concealment given my thin frame. It has worked out for me wonderfully! No more bulky holsters when wearing shorts and t-shirts in the hot Florida weather. The sliding option on the clip for different levels of concealment is a great way to modify your preferences on how deep you want your concealment to be. The best way to carry in my opinion!!

JOHN

Love it does as it should. Wish metal was a little heavier but no issues so far. I carry every day and so far been in very hot conditions.

Jonathon

I love the clipdraw and plan on getting this for my other guns. My brother inlaw and I are just curious as to why mine is longer than his as we got it for the same gun. Otherwise love it.

Lutrell

love it

Anthony

Great product and great customer service!

Lance Taylor

Springfield XDS 9. Been through 3 different cc holsters. Good and bad with each. But came down to I didn’t like wearing any of them all the time. And if going in a place where I couldn’t carry. Pain trying to get pistol and holster out to leave in the vehicle. Heard about the Clipdraw. Thought I’d give it a shot for the price. Should of got this long ago. Would of saved me money. Couldn’t believe how comfortable it is and easy in and out. Draw is extremely fast. Love it.

Mike

Haven’t been able to use it much as I don’t have my concealed carry yet. I have used it around the house to get used to it and on my hunting property. So far I like it. It will also work with a holster I purchased so I have options based on clothing and where I am going.

C Mac

Received mine for my XDS 45 and install was easy. Will run some ammo through and see how the mounting plate holds up. As far as the carry characteristics it’s great!

Rocky J

Ordered clipdraw for my XDs 45. I absolutely love it. By far the carry option on the market. I have over 200 in holsters trying to find the one that works best for me. Clipdraw should have been my first choice!
Super Fast Shipping! Extremely easy to install onto the firearm! After installation it is so versatile with literally no printing at all!
Thank you clipdraw!

Andy rich

Good morning I have a question can this be used for out of the belt carry as I can’t carry on the inside of my pants….. and I have a Taurus 705 slim thanks Andy

Marc Stramer

I got my Clip Draw for my XDm .45ACP today and I must say I’m very impressed with it. It was a bit of a challenge installing the back plate, the firing pin spring was fighting me a bit but once I got the plate started with the spring partially compressed I was able to push it down enough to install. I do appreciate the extra hardware included in the kit, as well…smart thinking!

I chose the XDm because I was very happy with the performance of my wife’s XDs .45ACP but it feels really small in my hands so that’s why I chose the larger model. The size of my XDm makes finding low profile carry options a challenge but the Clip Draw solves that with ease. What’s also nice is that it works with other holster options so I have a choice on how I want to carry. Thank you for making a high quality product that allows us to exercise our 2nd Amendment right with comfort and confidence.

Michael

Just received the Cilp draw for my Springfield Armory XD-40. It took me about 30 minutes to install. OK 27 minutes were spent looking for the firing pin plastic guid. You did tell me it’s spring loaded. Great product. When not clipped inside my belt I can just put the firearm in s pocket and it’s ready to draw.

Jacob Sprowls

I bought a Clip draw clip and trigger guard for my Springfield XD mod 2. And I absolutely love it. No more bulky holster to have to keep up with and the clip doesn’t get in the way when firing the pistol. Fast and easy process from checkout to delivery. Will definitely be buying more clips in the near future for my pistols. Thank you!!!

Aaron Conway

Very interesting! Nice concept.

Rod Tuzicka

Perfect fit. Excellent product

Darin

I bought the universal stick on one for my XD-E.
I was hesitant about doing it because i didn’t think the it would stay stuck to the gun with just that adhesive strip.
I am pretty active in my day to day work and activity’s, lot of squatting and crawling under equipment.
It puts a lot of pressure on the clip.
But it has held beautifully.
And its thin and doesn’t take away from the look of the gun.

Thanks Clip Draw.

adam

so much better than any holster! less bulky, comfortable, quick draw and insertion, easy setup …. especially where I carry (left draw in small of back for right hand draw). wish I got these years ago instead of wasting money on holsters. got one for my glock too, wish they had custom one for my walther

Marc Cole

Oh my goodness!!! I don’t know what took me so long to come across this beltclip. A world of difference. I leave the house in sweatsuits a lot now and the Clipdraw makes it so I can still carry without having to wear a belt. Just tie up the drawstring, slide it in, and it feels secure the whole time. Thanks Clipdraw!

Dale johnson

Installed on my XD subcompact about a week now. Very impressed. Much more discreet wearing in restaurants, family functions etc. Wish I’d had this along time ago. Still fits in my kydex paddle holster with no problem.
Only negative is the clip is too tight, a bit difficult to get over waistband and belt. But that is better than being too loose right? Will try to bend it out a bit.
Great product, buying another for my xd45 and glock.