Extra tape (6 strips & 6 prep pads)

Extra Tape (6 Strips & 6 Prep Pads)

Pack of 6 3M VHB Strips and 6 Prep Pads


Minimalist Concealed Carry Belt Clips for Revolvers
Guaranteed to Mount on ANY Make or Model Revolver
Inside the Waistband Concealed Carry
Eliminates Bulk from Traditional Style Holsters
No Printing – Slimmest Possible Carry Profile
2 Minute Install – No Modifications
American Made
Trusted by Law Enforcement, Military and Licensed Citizens since 1995!
The Best Revolver ‘Holster’ for Concealment

GUARANTEED to securely mount to your revolver
Requires only 2 3/4″ x 1/4″ of mounting space
Versatile and customizable for everyone’s body type and carry style!
Adjustable for your personal height/depth of carry
Mount Forward for Higher Carry & Maximum Access
Mount Further Back for Deeper Carry & Maximum Concealment
Mounts on right side below the cylinder
Secures to Steel, Aluminum or Polymer surfaces
Achieve secure hold when placing directly over top of serrations, ridges, etc
Fits small or large frame revolvers
Stop dressing ‘around’ your holster – wear the clothes you want while comfortably and securely carrying your concealed pistol.
Clips to your waistband (with or without belt), boot, pocket, vest and more – with confidence.
Clipdraw is always ready – grab and go for a quick trip out or wear confidently as part of your everyday carry.
Great for warm weather – wear with your shorts and t-shirt.
Not an either/or – Clipdraw will fit with your traditional style holster.  You will not need to remove your Clipdraw when carrying with other holsters.

Requires only 2 3/4″ x 1/4″ of mounting space on your pistol
Mounts using a 3M Corporation VHB (Very High Bond) #4941 Double Coated Aircraft Adhesive
This heavy duty 3M VHB is used in the automotive and aviation industries to replace screws and rivets in car doors and airplane wings
VHB strips are specifically cut to Clipdraw’s dimensions
Secure mount is achieved even when placed directly over top of any serrations (such as ridges on the revolver), engravings, text, textured, smooth or special surfaces on your revolver
Once installed, Clipdraw provides a permanent hold – you may clean your gun while the Clipdraw is attached. It is not affected by chemicals, oils, heat, etc.
For Removal – use a flat blade to ‘ break the bond’ of the VHB.  It will peel off like a rubber band with Zero cleanup.  No gunk, junk, residue left behind. Its like it was never there.
6 Strips of VHB are included with each Clipdraw kit so the user can play around with the positioning of the Clipdraw.  The first time it is installed, it may not be the exact height you want.  Simply remove the Clipdraw and re-install to your optimal carry position.
RV-B & RV-S fit ANY Revolver with adequate mounting space!

Special Tempered Spring Steel Clip with High Quality Black Oxide or Nickel Plate Finish
Provides Flex and Memory for use over any sized belt then returns to original retention point.  Finish prevents any scratching or abrasions to your pistol.
Steel Mounting Plate with 2 Pre-Drilled Screw Holes
4 Screws (only 2 required, 2 are extra) and Allen Wrench for installation of clip to mounting plate
6 Alcohol Preparation Pads
6 Specifically Cut 3M VHB #4941 Double Coated Aircraft Adhesive Strips

Universal Clipdraw comes in one standard size only

1. Prepare area on pistol with alcohol pad. Also wipe steel mounting plate with alcohol pad.
2. Firmly apply the 3M VHB strip to your firearm.
3. Directly on top of the 3M VHB lay the steel mounting plate. This will secure the Clipdraw to your revolver.
4. Use two screws to attach the clip portion to the mounting plate portion.

1. Use a flat blade to get underneath the 3M VHB to ‘break the bond’
2. It will peel back easily with no gunk, junk, residue or extra clean up necessary.
3. Each 3M VHB strip is one time use only.

Clipdraw provides the finest products for revolver holsters and iwb carry. Try one for yourself and enjoy comfort and high level comfort.

Related Products

Notify of
Inline Feedbacks
View all comments