Trigger sheath – glock 17 – 41, 44, 45
Design benefits graphic
Trigger sheath – glock 42, 43, 43x & 48
Trigger sheath – glock 17 – 41, 44, 45
Trigger sheath – glock 17 – 41, 44, 45
Trigger sheath – glock 17 – 41, 44, 45
hand gun with trigger guard being placed in a purse
(12 customer reviews)

TRIGGER SHEATH – GLOCK 42, 43, 43X & 48

  • Fits Glock 42, 43, 43X & 48
  • Simple & Safe Trigger Protection to Prevent Accidental Discharge
  • Snap on Trigger Sheath over Trigger Area
  • Loop Paracord around Belt, Belt Loop or any Secure Object
  • When you Draw your Weapon, Paracord comes to Full Length
  • Sheath Removes Itself and Pistol is Ready to Fire

$14.95

Glock Concealed Carry Belt Clips
Inside the Waistband Concealed Carry
Eliminates Bulk from Traditional Style Holsters
No Printing – Slimmest Possible Carry Profile
2 Minute Install – No Modifications
Glock Trigger Safety Products Available
American Made
Trusted by Law Enforcement, Military and Licensed Citizens since 1995!
The Best Glock ‘Holster’ for Concealment

Stop dressing ‘around’ your holster – wear the clothes you want while comfortably and securely carrying your concealed Glock.

Clips to your waistband (with or without belt), boot, pocket, vest and more – with confidence.

Clipdraw is always ready – grab and go for a quick trip out or wear confidently as part of your everyday carry.

Great for warm weather – wear with your shorts and t-shirt.
Not an either/or – Clipdraw will fit with your traditional style holster.  You will not need to remove your Clipdraw when carrying with other holsters.

Compatible with front mounted or grip lasers
Clips are made specific to each Glock and are NOT interchangeable!
GS-B fits 9MM, .357, .40 & Slim .45 Glocks (17-19-22-23-24-25-26-27-28-30S-31-32-33-34-35-36)
GL-B fits 10MM & .45 (20-21-21SF-29-30-30SF-37-38-39-40)
GS & GL Clips are Longer

G42-B fits Glock 42 .380 Only
G43-B fits Glock 43 9MM Only
G42 & G43 Clips are Shorter

GS & GL Clipdraw Hardware
Glock 42 & Glock 43 Hardware

Special Tempered Spring Steel Clip with High Quality Powder Coat Finish
Provides Flex and Memory for use over any sized belt then returns to original retention point.  Finish prevents any scratching or abrasions on your Glock.
Replacement Slide Cover Plate made from Machine Aluminum with 2 Pre-Drilled Screw Holes.
4 Screws, 4 Washers (2 are required, 2 are extra) and Allen Wrench for installation of clip to replacement slide cover plate.
Each Clipdraw is made to the exact specs of your Glock and can not be interchanged.
GS & GL Clips are Longer for Standard Frame & Large Frame Glock Pistols
G42 & G43 Clips are Shorter for ‘Pocket Glocks’ Glock 42 & Glock 43 ONLY

Add a custom engraving to your Glock Clipdraw!
Perfect gift for family, friends or yourself
Names, Nicknames, Dates, 2nd Amendment, Military and Law Enforcement Messages – Anything that’s important to you!
Quick Shipping – Engraving does not slow down your shipment timeframe

Separate slide from the frame
Remove the barrel assembly
Using a pin punch or screwdriver – press down on black spacer located in the slide of your gun and press towards the muzzle.
With your other hand – carefully remove the slide cover plate.  Be Careful! Components are spring loaded.
Install Clipdraw replacement slide cover plate by pressing on black plastic insert at back end of slide while simultaneously inserting slide cover plate into position.
Mount the clip on either side using screws, washers and allen wrench provided.

Kydex Trigger Guard made specifically to fit your Glock.
Provides trigger protection when your pistol is ‘holstered’
Guard removes itself when pistol is drawn – no extra steps for the shooter!
Does NOT fit with front mounted lasers.
High Quality Kydex does not crack or break
Set the cord length to your appropriate draw.

GMH fits All Glock Models Except G42 & G43
G4243MH fits Glock 42 & Glock 43 Only

Snap trigger guard onto pistol over your entire trigger housing area
Loop cord around your belt or belt loop
Once drawn from concealed position, the cord will come to full length and kydex guard will remove itself from your pistol.
Pistol is ready for operation.

Provides Trigger Protection when your Glock is ‘holstered’
Ejects easily with trigger finger – adds zero time to your draw
Right Hand Saf-T-Blok for Right Handed Shooters
Left Hand Saf-T-Blok for Left Handed Shooters
Plastic insert with tension key snaps into place securely and firmly
Rugged Carbon filled Polymer textured to match the Glock
Use the tension key and included allen wrench to set the Saf-T-Blok to proper tension for your Glock and personal preference.
Insert Saf-T-Blok behind the trigger in the trigger guard area.
Once drawn – eject Saf-T-Blok using your trigger finger.
Glock is ready for Operation.

If you are looking for the best concealed carry holsters for Glocks, you’ll want to try the Clipdraw. Trusted by many satisfied customers.

Looking for some of our other pistol products? We also offer Clipdraw models for Ruger LCP, Springfield XDS, M&P Shield, j-frame revolvers and more!

Feel free to check out our other pistol options and if you have any questions please feel free to reach out to use using the contact form on the site! We have installation guides for all products to help you install the product.

Related Products

(12 customer reviews)
Subscribe
Notify of
guest
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Clay N

This sheath is good, fits my G42 well. I tied the lanyard in a knot and just attach it to my beltloop with a half-hitch.

Bob Palumbo

Works well and gets the job done.

Greg W.

Great trigger guard for my Glock 43X. I carry Appendix style and run the lanyard cord around my belt and it works perfect.

Jeff Herrera

Good item. Good quality. Solid and sturdy.

Jonathan

Fits very well, works great to leave in a pocket or appendix style with the core tied to a belt loop.

Brandon

Exactly as advertised. Very positive click and very secure on my 43x. Fits perfectly

Tim

I wanted an extra measure of safety for my Glock 43, this fits the bill perfectly.

Pew

Because this isn’t exactly molded the way kydex would be, it’s actually compatible with both the SS80 as well as the PF9SS. This is something I encourage the manufacturer to advertise, so that more people will know it’s available for that. I don’t believe there are any trigger guard holsters made for those models. You have the market cornered. Take what’s yours.

Lisa

Excellent products and customer service. Thank you

John

Perfect fit for my Girlfriends Glock 43, conceal carry in her purse.

Dan

Perfect. Not over snug like some other trigger sheaths I have used.

Martin
Rating :
     

Retired police officer. Spent 30 years qualifying with Glock 17. Now retired and carrying a Glock 42 or 43x depending. But unless I’m using a good belt mounted holster, what I would NEVER do is pocket carry any Glock without one of these molded trigger guards. They clip on securely and prevent an “accidental discharge.” With the trigger guard in place I feel very comfortable slipping either gun into a soft pocket holster (or pocket) before going out. After years of belt mounted duty holsters I’m enjoying the quick and easy pocket carry made safely accessible by these trigger guards. I’ve seen and heard of too many inadvertent semi auto discharges not to want that area inside the trigger guard covered securely until such time as I, hopefully never, need to start shooting.